{"id":90014,"date":"2026-06-28T00:00:00","date_gmt":"2026-06-28T00:00:00","guid":{"rendered":"https:\/\/genixenergy.com.ua\/?p=90014"},"modified":"2026-07-05T22:05:07","modified_gmt":"2026-07-05T14:05:07","slug":"transfer-switch","status":"publish","type":"glossary","link":"https:\/\/genixenergy.com.ua\/ru\/glossary\/transfer-switch\/","title":{"rendered":"\u041f\u0435\u0440\u0435\u043a\u043b\u044e\u0447\u0430\u0442\u0435\u043b\u044c \u0440\u0435\u0437\u0435\u0440\u0432\u0430"},"content":{"rendered":"

A transfer switch is a device that routes a home between the utility grid and a backup battery source, keeping grid power and backup power electrically isolated from each other.<\/p>\n\n

Why it matters for home backup power<\/h2>\n\n

When the utility grid fails, a transfer switch is the gate that connects a home to battery backup. The isolation it enforces carries a serious safety implication: grid-maintenance workers assume that a de-energized line is safe to touch. If a home backup system pushed power back onto a line that crews were repairing, the result could be fatal. An automatic transfer switch (ATS) prevents this by opening the grid-side connection first, then closing the backup-side circuit, a sequence called open-transition switching. This is the same electrical isolation principle that underlies island mode<\/a>.<\/p>\n\n

Because a transfer switch is a hardwired electrical component, installation must always be carried out by a qualified electrician. Improper wiring can create live conditions on lines that repair crews expect to be de-energized.<\/p>\n\n

Transfer Switch in practice<\/h2>\n\n

Key numbers<\/h3>\n\n

The key performance figure is switchover time: how long a home goes without power while the switch operates. Static (solid-state) ATS units can switch in under 20 milliseconds, a gap most household electronics do not register. Electromechanical contactor-based ATS units typically switch in 2 to 10 seconds, acceptable for lighting, routers and most appliances. Backup time<\/a> after the switch activates depends entirely on battery capacity and the connected loads.<\/p>\n\n

ATS vs manual transfer switch<\/h3>\n\n

An ATS detects a grid outage and completes the switching sequence without human intervention; it is the correct choice when critical loads<\/a> such as medical equipment, refrigeration or communications must stay powered unattended. A manual transfer switch costs less upfront but requires someone present to operate it, making it a limited option in applications where safety or continuity cannot depend on a person being available.<\/p>\n\n

How Genixgreen uses Transfer Switch<\/h2>\n\n

Genixgreen LiFePO4 battery storage systems work with compatible transfer switches, including ATS functionality integrated into the hybrid inverter stage. When the inverter detects grid loss, it opens the grid connection and switches connected circuits to battery power within a controlled switchover sequence, so the home operates in isolated backup mode without sending energy back to the grid.<\/p>\n\n

The LiFePO4 cells in every Genixgreen system are manufactured to IEC 62619, the international safety standard for stationary lithium cells and batteries, covering cell integrity and protection under fault conditions. (Source: IEC 62619<\/a>) Genixgreen has built LiFePO4 storage in its own factory since 2011 and ships to 100+ countries, with local stock in Odesa for delivery across Ukraine.<\/p>\n\n

Related terms<\/h2>\n\n